NEW plumbing method for an ULTRA QUIET REEF TANK!!!! LONG !!!! - Reef Central Online Community: "So here is my final setup...........
On the main 1" return bulkhead in the overflow box I have a 1" piece of solid pvc that goes up to approx 1/2 to 3/4 of the way up inside the overflow( glued to the bulkhead). It must be sealed at the bottom or glued. (this is to keep the water IN the overflow box when power is out so you dont flood your sump.) I also have a 1" coupler on top of the pipe so I could insert that perferated pipe so that it is WAY above the water line and capped of so snails and large particles can not clog it.( I have about 10 or 12 inches of perferated tube so it will be next to impossible to stop the flow of water. Anything that will clog this would have clogged a "durso pipe" a long time ago!)
On the 3/4 bulkhead I have the solid tube (glued to the bulkhead) about 1 " below the teeth of the overflow box with a strainer cap on it (or I could have used some of the perferated pipe with a reducer bushing). The return for this goes directly to the sump just above the water line. It will only flow water in the event of a restriction in the main return line..."
'via Blog this'
No comments:
Post a Comment