Useful Things To Know When Navigating Sub Par Legal Representation

When Do It Yourself Law Fails:

Useful Things To Know When Navigating Sub Par Legal Representation:

A problem of growing proportions in the community today as the continuous magini

A brief except from an article I found online entitled: ( A link is provided to the relevant website below the excerpt).

The Hierarchy of Attorney Malpractice

The fourth group arises from other calendar control problems not created by a failure to appear in court. Thus, a case marked off calendar by a party must be restored within one year. A default judgment must be taken within one year. An order must be settled on a motion decision within 60 days or the motion may be waived or deemed abandoned. A motion to renew or reargue must be made within 20 days, a motion to dismiss for lack of personal jurisdiction must be made within a short time period. A 90 day notice requires action within that time period or the case will be dismissed. A notice of appeal must be filed within 30 days of the service with notice of entry of the order. An appeal must be perfected within a certain time period, depending on the department. 

https://www.bluestonelawfirm.com/the-hierarchy-of-attorney-malpractice.html

A place to start: Tikune Olam all the time Stephen C. Sanders

Do it yourself help foreclosure and eviction issues

https://www.nycourts.gov/courthelp/GoingToCourt/motionsOSC.shtml

Gemeinhardt 2SP Flute - Everything You Wanted to Know | eBay

Gemeinhardt 2SP Flute - Everything You Wanted to Know | eBay: "Many of even the oldest 2SP’s still play beautifully, and are in fact highly sought after.  

    However, the most recent Gemeinhardt 2SP flutes are superior in every way to their older brothers.  Gemeinhardt continues to modify their design continuously, and the only way to ensure the most recent advancement is to purchase a brand new flute.  A brand new Gemeinhardt 2SP will play better than any older one"



'via Blog this'

Amazon.com : HIPA Ignition Coil 4140 400 1308 for STIHL FC55 FS38 FS45 FS55 HL45 HS45 Trimmer : Patio, Lawn

Amazon.com : HIPA Ignition Coil 4140 400 1308 for STIHL FC55 FS38 FS45 FS55 HL45 HS45 Trimmer : Patio, Lawn: "Replacement manufacturer part number: 4140 400 1308
Will work on the following units that are 2001 and newer: STIHL FS38 FS45 FS45C FS55R FS55T FS55RC HL45 HS45
Notice: Please compare it with your old coil carefully, it won't fit ignition coil mark 4140 1306A / 4140 1308A / 4140 1305"



'via Blog this'

How to Replace Flute Pads : Instrument Clinic, Band Instrument Repair Supplies

How to Replace Flute Pads : Instrument Clinic, Band Instrument Repair Supplies: "All pads should be punctured on the side with a pad prick or needle to allow moisture to be released when replacing flute pads. Apply heat to the flute pad cups that require adhesive and thoroughly remove any leftover adhesive out of the flute pad cup. Be careful not to burn yourself and have fire safety equipment readily accessible during flute pads replacement. Once the flute pad cup is clean, insert 1-3 adhesive pellets in the flute pad cup and apply heat. You need enough heat to melt the pellets, but do not heat to boiling. Gently insert the flute pad into the flute pad cup and allow the key to cool. Replace the key on the flute and, using an appropriate heat source (ideally a micro torch), carefully apply a small amount heat to the flute pad cup. You need to be extremely careful not to over heat the adhesive. Allow the replacement flute pad to level itself over the tone hole. You may need to adjust the flute pad with a pad slick, or other small, flat piece of metal. Check the flute pad for leaks with the feeler gauge or leak light. If there is a leak, apply heat and make the appropriate adjustments to the flute pad."



'via Blog this'

Flute Pad Installation / Replacing flute pads

Flute Pad Installation / Replacing flute pads: "But, don't use centering as your only guide, sometimes they just don't. The pads MUST be level or the flute won't play.

DON'T just start bending the fronts of the pad cups down. The smart thing to do here is: DON'T BEND ANY KEYS IF YOU CAN GET OUT OF IT. And most important: DO NOT USE ANY PARTIAL WASHERS. So normally, they do not distort. You may level the pad side to side by twisting the key arm a little or you may lower the front of the cup by bending it down. This most likely will bend the edge of the pad cup a little, but not enough to be noticeable. "



'via Blog this'

Flute Pad Installation / Replacing flute pads

Flute Pad Installation / Replacing flute pads: "You notice, these groups of keys are all mounted on the same hinge points. Are things getting a little clearer? Now, if a pad is still lighter in the back, take the key off and add some more thickness. If it is now lighter in the front you may want to remove a little until it is the same pressure or LEVEL all around. Be sure you check the bottom stack post. If those pads get progressively worse, the post needs to move. If the post is bent toward the holes, the pads will get progressively lighter in back; if away, heavier and the pads won't be centered either. "



'via Blog this'