Flute Pad Installation / Replacing flute pads: "But, don't use centering as your only guide, sometimes they just don't. The pads MUST be level or the flute won't play.
DON'T just start bending the fronts of the pad cups down. The smart thing to do here is: DON'T BEND ANY KEYS IF YOU CAN GET OUT OF IT. And most important: DO NOT USE ANY PARTIAL WASHERS. So normally, they do not distort. You may level the pad side to side by twisting the key arm a little or you may lower the front of the cup by bending it down. This most likely will bend the edge of the pad cup a little, but not enough to be noticeable. "
'via Blog this'
No comments:
Post a Comment